DistributedNetworks DistributedNetworks


Serial Networking Devices  «Prev  Next»

Setting up multiple Network Interface Cards

  1. Click the Network Configurator icon.
  2. Click Interfaces.
  3. Click the Add button.
  4. Select Ethernet.
  5. Click OK.
  6. Fill in 192.168.0.1 in the IP field and 255.255.255.0 in the Netmask field. Click Done to continue.
  7. Click Save. Instructions: Save the configuration.
  8. Click Add.
  9. Select Ethernet.
  10. Click OK.
  11. Fill in the 216.23.45.86 in the IP field and 255.255.255.0 in the Netmask field. Click Done to continue.
  12. Click Save.
  13. This completes the simulation.